Protek and a scotch brite pad.The thing is steel Matthew not silly putty. You would have to really try hard to damage that thing . Or ditch that piece of iron and get a carbon fiber lever. Fujan, Faulk or in a bit of shameless self promotion look for the new Tom D carbon fiber lever coming to all major retailers soon. Ok maybe not the retailers part as I'm still in the prototype phase but I will have a link on my website soon.I'm still trying to come up with a catchy name for this thing. " McDriscoll Wonder Stick " ? "The Driscollmatic feather light Piano Master?" " The Dude" " The Phyllis Bondi " I'll get back to you on the name. In the mean time any cleaner - lube will help out with the swap. Even a shot of McLube might help after the thing is clean. Don't forget to pay attention to the heads also. Tom Driscoll ----- Original Message --- From: Matthew Todd To: pianotech at ptg.org Sent: Saturday, February 27, 2010 12:45 AM Subject: [pianotech] Hale Extension Rod Hi all, What is a good (effective) way to clean the threads on my hale extension rod threads and tips? It's getting rather difficult to swap out heads. Something that obviously doesn't ruin the threads. Thanks! TODD PIANO WORKS Matthew Todd, Piano Technician (979) 248-9578 http://www.toddpianoworks.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100227/937685d2/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC