The best solution is to dump the extension hammer. Until you try a really stiff tuning hammer you don't know what you're missing... David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "Marcel Carey" <mcpianos at hotmail.com> To: pianotech at ptg.org Received: 2/27/2010 8:18:56 AM Subject: Re: [pianotech] Hale Extension Rod >Swapping the whole extension might be the best solution but it puts a lot more >weight into the tool bag. To help the treads to last longer, I use teflon tape on the >treads. >Marcel > >_________________________________________________________________
This PTG archive page provided courtesy of Moy Piano Service, LLC