Kerry Kean Guitarist, singer-songwriter, musical raconteur 330-678-1990 www.kerrykean.com www.myspace.com/kerrykean -----Original Message----- From: Al Guecia/AlliedPianoCraft [mailto:AlliedPianoCraft at hotmail.com] Sent: Saturday, February 27, 2010 12:06 PM To: David Ilvedson; pianotech at ptg.org Subject: Re: [pianotech] Hale Extension Rod hold down Alt and type 0176 -------------------------------------------------- From: "David Ilvedson" <ilvey at sbcglobal.net> Sent: Saturday, February 27, 2010 11:57 AM To: <pianotech at ptg.org> Subject: Re: [pianotech] Hale Extension Rod > For me #2, 15 degree for everything. Hey, how did you make the degree > symbol? > > David Ilvedson, RPT > Pacifica, CA 94044 > > ----- Original message ---------------------------------------- > From: "Al Guecia/AlliedPianoCraft" <AlliedPianoCraft at hotmail.com> > To: pianotech at ptg.org > Received: 2/27/2010 8:53:03 AM > Subject: Re: [pianotech] Hale Extension Rod > > > > >>> Benj. D. Palmer wrote: >>>> It may be easiest on the threads to simply buy a shaft for each >>>> head/tip >>>> you own and swap it out as a unit when you need another size. >>>> Definitely >>>> quicker! >>> >>> I agree. Swapping heads repeatedly is the very best way there >>> is to ruin threads. Why swap heads anyway? >>> Ron N >>> > >>For me, 15° for grands and 5° for verticals. > >>Al - >>High Point, NC >
This PTG archive page provided courtesy of Moy Piano Service, LLC