[pianotech] Applying PVC-E to new plastic keytops

[David Love]

I buy it from Pianotek.  

David Love
www.davidlovepianos.com


-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Bruce Browning - The Piano Tuner
Sent: Friday, January 01, 2010 4:34 PM
To: pianotech at ptg.org
Subject: Re: [pianotech] Applying PVC-E to new plastic keytops

David,
Can you suggest a few brand names for PVC-E glue, and what other uses is
it recommended for? This is so that I can identify a local source for it.
Thanks


> I do use PVC-E and haven't had any problems with
> it.   A light clamping is all that's necessary and on tops with molded
> fronts this particular clamping arrangements holds the fronts securely to
> the front of the key while the glue sets.