Paul, Thanks for the info on Arledge. Sounds like a good recommendation. Mike Paul T Williams wrote: > Hi Mike, > > I use Arledge quite a bit. He askes for 2 measurements for single , > bi, and trichords as well as any on the treble bridge. Hitch pin to > bridge pin (on speaking side) and hitch pin to agraffe. Never got a > bad set from him. > > Paul > > > > From: Mike Spalding <mike.spalding1 at verizon.net> > To: Pianotech <pianotech at ptg.org> > Date: 01/19/2010 09:13 AM > Subject: [pianotech] Strings made to measure > > > ------------------------------------------------------------------------ > > > > List, > > I'm still trying to build a relationship with a string maker (any > stringmaker) such that they will understand what I'm trying to order, > and will reliably produce usable strings. Latest issue: string length > as wound vs. string length at pitch. When you order strings to a set of > measurements, do you shorten the specified length by an amount of > stretch/loop crush that you estimate, or do you rely on the stringmaker > to estimate the length change and make the strings shorter than you > specify? How do you communicate this with your stringmaker? Stories of > successful relationships with specific stringmakers much appreciated! > > thanks > > Mike > >
This PTG archive page provided courtesy of Moy Piano Service, LLC