Recently I again tuned a piano with loose balance rail pins. They are not loose enough yet that they wobble, but at each tuning there are always some that have worked there way up out of the holes completely and others that have to be tapped back down. Before I start dowsing with CA, is there some other solution that I should be looking at for this piano. Thanks. Rex Roseman -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100123/af276265/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC