Thank you for the good idea. I will look into doing that. Rex Roseman -----Original Message----- From: Floyd Gadd [mailto:fg at floydgadd.com] Sent: Saturday, January 23, 2010 7:58 PM To: pianotech at ptg.org Subject: Re: [pianotech] Loose Balance Rail Pins Hi, I ran into this when I replaced a set of corroded pins. I glue-sized the holes with a mixture of carpenter's glue and water--sorry, I forget the proportions. It made very loose pins fit well. Floyd Gadd Manitoba Chapter
This PTG archive page provided courtesy of Moy Piano Service, LLC