[pianotech] Kimball pedal bracket-Nylon/plastic

[Dave Davis]

Someone a few years ago (Ron N, maybe?) created a custom replacement from pinblock stock. There might be a photo in the archives.  

Dave Davis, RPT
Renton, WA



-----Original Message-----
From: "Claude Harding" <charding88 at comcast.net>
Date: Mon, 25 Jan 2010 15:41:25 
To: <pianotech at ptg.org>
Subject: [pianotech] Kimball pedal bracket-Nylon/plastic

 
Does anyone know where I can get replacements for the nylon or plastic pedal
brackets found in many Kimball pianos?
 
They are made in two pieces, a top and a bottom, holding all three pedal
pins, and screwed into the bottom board with four screws.
 
I have checked with Schaff, and they don't have them anymore.
Nothing like that in the Pianotek catalog, either.
 
Any suggestions appreciated.
 
Claude Harding, RPT
Dayton, Texas
 
 
 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100125/df2f6dbb/attachment.htm>