Cut it out, or I'll paulverize the lot of you. On Jan 27, 2010, at 5:56 PM, Conrad Hoffsommer wrote: > > I don't know about y'all Pauls, but I think I'll have another St Pauli... ;-} > (Trying not to be Paulitical) > > Conrad Hoffsommer > > > > > From: tunerboy3 at comcast.net > To: pianotech at ptg.org > Date: Wed, 27 Jan 2010 18:33:49 -0500 > Subject: Re: [pianotech] Paul oh Paul oh Paul > > Maybe we should take a paul and see if paul is ap-paul-ed with our responses. > > From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of paul bruesch > Sent: Wednesday, January 27, 2010 6:25 PM > To: pianotech at ptg.org > Subject: Re: [pianotech] Paul oh Paul oh Paul > > Well, I guess we make up for our "small" name in with large numbers! > > We should take a PAUL and see how many peoPAUL would like this thread to end before it casts a PAUL over the list. > > Pablo Barushsky > Wasserstille, MN > > > On Wed, Jan 27, 2010 at 5:12 PM, G Cousins <cousins_gerry at msn.com> wrote: > PAULeeeeeze! Don't make me call the PAULice! > There are WAY too many Pauls in the PAULpulatioin. > This is making my Bunyan's ache. > > Just for the record, Here's the official Origin of the wonderful name: > pronounced pahl. It is of Latin origin, and its meaning is "small". > http://www.thinkbabynames.com/meaning/1/Paul > > Regards. > G."Pablo" Primos > > > > > > > In a message dated 1/27/2010 4:11:29 P.M. Central Standard Time, > paul at bruesch.net writes: > > It's > apPaulLing to me how many Paul's there are in this biz... > > Paul > > > > When (and if) I die, I will be carried by Paul bearers. > > > > Paul > > > Paul > > > Paul > > > Paul > > > Paul > > > Paul > > > Paul > > > > --Forwarded Message Attachment-- > From: pwilliams4 at unlnotes.unl.edu > To: pianotech at ptg.org > Date: Wed, 27 Jan 2010 16:15:43 -0600 > Subject: Re: [pianotech] Modified Spade Bit was Chickering Pedal Lyre > > I aPaulogize!! > > > > Paul > > > > > > > > > > > From: > paul bruesch <paul at bruesch.net> > > To: > pianotech at ptg.org > > Date: > 01/27/2010 04:11 PM > > Subject: > Re: [pianotech] Modified Spade Bit was > Chickering Pedal Lyre > > > > > > > > > > It's apPaulLing to me how many Paul's there are in this > biz... > > > > On Wed, Jan 27, 2010 at 3:20 PM, Paul T Williams <pwilliams4 at unlnotes.unl.edu> > wrote: > > Aren't all of we "Paul's" > great help? (most of the time) > > > > Paul > > > > > > > > > > From: > > "Paul Milesi, RPT" > <paul at pmpiano.com> > > > To: > > PTG Pianotech List <pianotech at ptg.org> > > > Date: > > 01/27/2010 02:27 PM > > Subject: > > Re: [pianotech] Modified Spade Bit was > Chickering Pedal Lyre > > > > > > > > > > > > > > Thanks, Paul! (Please note there was one photo that didn’t come > up; perhaps you forgot to upload it?) > > > > Big help! Many thanks to all for the great lessons and insights to > help me do a beautiful job! > > > > Paul > > > > Paul Milesi, RPT > > Washington, DC > > (202) 667-3136 > > E-mail: paul at pmpiano.com > > Website: http://www.pmpiano.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100127/3f139027/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC