Tom,
Yeah, you did hear it here, from me. The other company stole
the idea from its’ inventor. Thanks for including the link to the inventors
site below.
Greg Newell
Greg's Piano Forté
www.gregspianoforte.com
216-226-3791 (office)
216-470-8634 (mobile)
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Tom Driscoll
Sent: Tuesday, July 27, 2010 11:50 PM
To: pianotech at ptg.org
Subject: Re: [pianotech] pinblock flange angle
Ditto on the Tilt Box. I use mine to true the drill press table to a steel
rod inserted in the chuck and to set blade angle on the table saw. Great
tool and very accurate. I've heard ( maybe here) that the Tilt Box inventor
had the original design and it was copied by another company. I love the
Tilt Box !
Tom D.
http://www.bealltool.com/products/measuring/tiltbox.php
----- Original Message -----
From: Dale Erwin <mailto:erwinspiano at aol.com>
To: pianotech at ptg.org
Sent: Tuesday, July 27, 2010 10:55 PM
Subject: Re: [pianotech] pinblock flange angle
How slick is that?
New toy Bill?
Dale S. Erwin
-. <mailto:pianotech at ptg>
Subject: [pianotech] pinblock flange angle
One way to get your pinblock/flange angle just so. Gotta love the Tilt
Box............
William R. Monroe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100728/235bbe16/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC