IMO ... you would be safer to use humans to right this wrong. ----- Original Message ----- From: Gene Nelson<mailto:nelsong at intune88.com> To: pianotech at ptg.org<mailto:pianotech at ptg.org> Sent: Monday, June 21, 2010 3:24 PM Subject: [pianotech] was ( not for the feint of heart or anything else) Still considering how to best lift a 9' concert grand that is upside down, lying on its lid. Considering attaching strap/s to the support beams. I am a bit curious about these support beams that brace the inner and outer rims. They are mortised into the inner rim without an interlocking type butterfly joint or similar that I can see - just the rectangular end of the beam seated into a slot cut to fit. How strong do you think these joints are in regard to a lift? It does not appear they are glued or otherwise fastened. They probably will not separate but I am certain that the builders did not have it in mind to load these joints in this direction - what do youall think? Gene -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100621/a9035d92/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC