How about key pulley? From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Gene Nelson Sent: Monday, March 01, 2010 9:55 PM To: pianotech at ptg.org Subject: Re: [pianotech] hammer return noise Hello Jer, Thanks for your reply. The whippens are new and the let off button felts are new as well. Fact is that I can depress the key only a mm or two, just enough to lift the hammer - let it fall and get unwelcome noise on many keys. The jack is not being engaged nor is the drop screw nor does the hammer fall hard enough to touch the rest rail. Today I was able to quiet several - mostly by refining jack knuckle alignment and slightly rounding the far edge of the jack top. Still have a few things to try. Gene ----- Original Message ----- From: Gerald Groot <mailto:tunerboy3 at comcast.net> To: pianotech at ptg.org Sent: Monday, March 01, 2010 6:09 PM Subject: Re: [pianotech] hammer return noise Hi Gene, I haven't had time to read everything but, I haven't (unless I missed it-probably did-) noticed that you checked the felt that the jack hits upon returning. If it is worn, hard or compacted, it too, could possibly be the problem? Have you doodled around with the jack tender just slapping it back and forth to see if anything in that area is noisy? Just another thought. Jer -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100301/66456cf3/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC