[pianotech] finishing plates

[Terry Farrell]

I was thinking it was likely Paul. Thanks Alan.

Terry Farrell

On Mar 2, 2010, at 1:08 PM, reggaepass at aol.com wrote:

> It was Paul Revenko Jones.  The article begins in the Feb. issue of  
> 2005, page 18 and continues the following month.
>
> Alan Eder
>
> -----Original Message-----
> From: Terry Farrell <mfarrel2 at tampabay.rr.com>
> To: pianotech at ptg.org
> Sent: Tue, Mar 2, 2010 6:54 am
> Subject: Re: [pianotech] finishing plates
>
> Maybe someone can chime in and identify the  issue, but a couple  
> years back someone published an very thorough excellent article in  
> the PTG Journal all about prepping (shaping/polishing) new and used  
> agraffes. I've been following the procedures described in the  
> article and find the results very much worthwhile.
>
> Terry Farrell
>
> On Mar 2, 2010, at 7:20 AM, reggaepass at aol.com wrote:
>
>> Al,
>>
>> At what point do you replace agraffes rather than recondition  
>> them?  And do you use this method on new ones as well as used?
>>
>> Alan Eder

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100302/0351de32/attachment.htm>