With a modification, it works great. I put a curl in the plastic core and use it with just the terry cloth sleeve. The curl forces the end down on the soundboard. Another wrinkle is to insert the wand at the breaks where possible or even between the strings to reach the more remote areas of the board. Then pull it out after a few strokes and clean with the vacuum. Tom Cole John Formsma wrote: > > > On Wed, Mar 3, 2010 at 4:05 PM, Dean May <deanmay at pianorebuilders.com > <mailto:deanmay at pianorebuilders.com>> wrote: > > Here is a nice duster Tom Cole recommended on the list some 3 > years ago: > http://www.cleanitsupply.com/p-3779-proflat-duster-75-ung-pfd7g.aspx > > > I've tried this one, and it didn't work well at all ... at least for > dirt that has been on the SB for a while. I have two of the above that > I will sell cheap. One was tried once or twice, and the other is (I > think) still in the packaging. Make offer privately if you're interested. > > -- > JF
This PTG archive page provided courtesy of Moy Piano Service, LLC