>But, what can you do? Pull the entire damper system, add lead or springs? > Big job. I can understand the reasoning of the screws... I'd pull the dampers and tray. This will give you the opportunity to address the trichord tips and depth of cut and the guide rail too. You might also install retaining screws on the older glued-on flanges. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100310/3d7971fa/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC