Definitely the right thing to do when you can... David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "Jon Page" <jonpage at comcast.net> To: pianotech at ptg.org Received: 3/10/2010 1:32:31 PM Subject: Re: [pianotech] grand dampers >>But, what can you do? Pull the entire damper system, add lead or springs? >> Big job. I can understand the reasoning of the screws... >I'd pull the dampers and tray. This will give you the opportunity to >address the >trichord tips and depth of cut and the guide rail too. You might also install >retaining screws on the older glued-on flanges. >-- >Regards, >Jon Page
This PTG archive page provided courtesy of Moy Piano Service, LLC