I just use staples all the way around. When it comes time to replace pads, I cut a slit under the tank and use velcro tabs on the bottom of the tank to suture cover back together. Randy Mangus, RPT In a message dated 3/12/2010 1:28:12 P.M. US Eastern Standard Time, drwoodwind at hotmail.com writes: I have a couple of Dampp-Chaser undercover installs coming up. I've only done a couple in the past; with the staple-through-velcro square method. I did read about the heat activated fabric tape... anyone out there come up with a good process to make this job easier? thanks Ron Koval chicagoland ____________________________________ Hotmail: Trusted email with powerful SPAM protection. _Sign up now._ (http://clk.atdmt.com/GBL/go/210850553/direct/01/) = -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100314/c478d2a6/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC