Hi Mike, A lot of boat builders here on Martha's Vineyard use this material to block noise through the engine wall: http://www.acoustiblok.com Might be worth a look. David Stanwood >Mike, > >There is much in the archives concerning this. > >-- >JF > >On Fri, Mar 12, 2010 at 7:59 PM, Mike Kurta ><<mailto:mkurta1 at comcast.net>mkurta1 at comcast.net> wrote: > > Hey Gang: > I visited a customer today with a Yamaha C3 with DisKlavier. >Their complaint is that it is too loud even turned down. I >explained that the slate floor and high soaring ceilings don't help >and suggested foam baffles. > What has been your experience, who sells them, and how are they >installed? Thanks for the info, > Mike Kurta, RPT > Chicago chapter
This PTG archive page provided courtesy of Moy Piano Service, LLC