didn't Wegmans have that steel block with a tightening bolt for the tuning pin or some such thingee? Andrew Anderson On May 6, 2010, at 10:18 AM, Chuck Behm wrote: > Hi list - I've been asked to give a ballpark figure (a long distance > away - it'll be a couple hour drive to take a look) for new > pinblock, pins and strings on a Wegman grand. My question is whether > the grands had the patented tuning pins, and if they do, will that > make a difference as to the type of pinblock. I've dealt with a > number of Wegman uprights, but never a Wegman grand before. > Before I get serious at all about this, I'll schedule an afternoon > to drive out and look it over, but I would just appreciate any > advice from those of you who have worked on them. Chuck Behm
This PTG archive page provided courtesy of Moy Piano Service, LLC