[pianotech] muffler rail

[Jon Page]

>It takes 10 seconds to remove and about that to put back in place. Don't
>know why some talk of hating Yamaha muffler rails. All you need to do is
>manually push down the rail arm enough to remove the hook. Then remove the
>bass side from its hole and remove the spring. Then remove the other side.
>
>To install, reverse.  How hard can that be? In the time it took to write
>about it, I coulda done it 20+ times without a scratch.

I think it's easier to first 'manually push down the rail arm enough 
to remove the hook'
but then remove the treble side before the bass side. This enables 
you to maneuver
the rail to disconnect the spring.  To reinstall, connect the spring, 
insert the bass side
pivot, then insert the treble pivot.
-- 

Regards,

Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100507/20c6654f/attachment.htm>