>...had to raise the upstops out of the way , remove the screws that >mount the back action to the rear of the action cavity and lift - >rotate the whole assembly as much as the damper wires would allow >without bending. To allow the bck action to come forwards more easily, remove the damper guide rail screws to allow the rails to move forwards as well. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100519/7e8bb62b/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC