Oh, I forgot, you may also want to check hammer travel and burnishing...the shanks tend to twist. Barbara Nobbe, RPT Pitch Perfect 859-489-4793 barbara at pitchperfectpianos.com -----Original Message----- From: "Al Guecia/AlliedPianoCraft" <AlliedPianoCraft at hotmail.com> Date: Fri, 21 May 2010 09:46:36 To: Pianotech List<pianotech at ptg.org> Subject: [pianotech] Falcone GF-87 grand piano "Made in China" Hello list, I have been contracted to bring this piano up to concert readiness. It looks to be well made and has a decent tone, considering nothing has been done since delivery (and probably before delivery). This will be the first "Made in China" Falcone piano I have worked on. The regulating is way out. Let off over 1/2" from strings and of course little to no after touch. Does anyone have any experience with this piano? I would appreciate any information you can share. Al - High Point, NC -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100521/85a26dc2/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC