[pianotech] Yamaha G2R and G2B bass strings

[reggaepass at aol.com]

here is Arledge's instruction
... and a set of Arledge bass strings will be a noticeable improvement over OEM, IMHO.


Alan Eder


-----Original Message-----
From: Ron Nossaman <rnossaman at cox.net>
To: limhseng at gmail.com; pianotech at ptg.org
Sent: Mon, May 24, 2010 5:03 am
Subject: Re: [pianotech] Yamaha G2R and G2B bass strings


limhseng at gmail.com wrote: 
> Thanks Ron 
> For the bass strings- what are the important measurements and do I need to measure every bass string? 
> > Lim 
> Sent from my BlackBerry Wireless Handheld > Powered by Gee! from StarHub 
 
Hi Lim, 
You need hitch pin to speaking length bridge pin, hitch to agraffe, core diameter, and overall wrap diameter for every string. For instance, here is Arledge's instruction page. http://www.pianostrings.com/howtoorder.html  It's not difficult, just takes awhile. 
 
Ron N 

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100524/3cb359c3/attachment.htm>