[pianotech] Desk glide

[Richard Ucci]

Great idea Jon.

Rick Ucci/ Ucci Piano

On May 26, 2010, at 5:39 AM, Jon Page <jonpage at comcast.net> wrote:

> Breaking them loose as Ed mentioned works well but you'll also need
> to chisel out some.  Make new rails and screw them in instead of  
> gluing.
> A much easier fastening system and the screws add support.
>
> Attached is a photo of a rail at a school. It also has a support  
> rail below.
> I made a few of these lower support rails for pianos at the school  
> because
> in winter the desks would drop down in between the glide rails.
> -- 
>
> Regards,
>
> Jon Page
> <Desk3.jpg>
> <Desk2.jpg>