[pianotech] Unknown hammers

[Wim Blees]

The big promblen I see with these hammers is shape & thickness of tails. If you're going to use them you'll have some tail shaping to do.

Wim 

Sent from my HTC PURE™, a Windows® phone from AT&T

-----Original Message-----
From: Jon Page <jonpage at comcast.net>
Sent: Friday, October 01, 2010 2:21 AM
To: pianotech at ptg.org
Subject: Re: [pianotech] Unknown hammers

With the yellow 'reinforcement', I'd say Pfriemer.

When hanging a new set, to determine the strike point:
Glue a strip of card to the side of the hammer to align
the SP of the new.

Of you could just measure to the center of the hammer and hang it 90 degrees.
-- 

Regards,

Jon Page