I don't recall that particular trick having been posted. You might instead buy appropriate wood from Blackstone Valley Keyboard (Mike Morvan). Patrick Draine On Mon, Oct 4, 2010 at 12:21 PM, Ryan Sowers <tunerryan at gmail.com> wrote: > Hello list, > > I know this has probably been addressed many times. But I'm not having any > luck searching the pianotech archives. Specifically I'm looking for the > thread from a while back discussing using solid tuning pin bushings to > repair balance holes in keys. But when I search for balance hole repair I > just can't seem to come up with it. > > There needs to be better instructions for searching on the PTG site. Maybe > there is and I'm just to slow to find it! > > -- > Ryan Sowers, RPT > Puget Sound Chapter > Olympia, WA > www.pianova.net > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101004/4ecb6132/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC