Thanks John! That was the one! Much appreciated! On Mon, Oct 4, 2010 at 12:31 PM, John Delacour <JD at pianomaker.co.uk> wrote: > At 09:21 -0700 04/10/2010, Ryan Sowers wrote: > > ...Specifically I'm looking for the thread from a while back discussing >> using solid tuning pin bushings to repair balance holes in keys. But when I >> search for balance hole repair I just can't seem to come up with it. >> > > > <http://pianomaker.co.uk/technical/pully_keys/> > > The thread is in the topic "Pully Keys" starting 19/04/2010 > > JD > > > -- > ______________________________________________________________________ > Delacour Pianos * Silo * Deverel Farm * Milborne St. Andrew > Dorset DT11 0HX * England > Phone: +44 1202 731 031 > Mobile: +44 7801 310 689 > ______________________________________________________________________ > -- Ryan Sowers, RPT Puget Sound Chapter Olympia, WA www.pianova.net -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101004/4b4be13b/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC