I just saw a tip on the Woodworkers web site. When starting brass screws into new wood.. use a steel screw of the same size first, then insert the brass... Saves many slotted (screwed up) heads. Carlos Ralon,RPT ----- Original Message ----- From: Marshall Gisondi To: pianotech at ptg.org Sent: Wednesday, October 13, 2010 11:33 PM Subject: [pianotech] bench screws Hi Isaac, Thanks for the information on the screws. That was my idea too, to plug and make new holes if they are stripped which I'm guessing since the screws are already missing. I appreciate you giving me this information on the screws. thanks again Marshall Marshall Gisondi Piano Technician Marshall's Piano Service pianotune05 at hotmail.com 215-510-9400 www.phillytuner.com Graduate of The School of Piano Technology for the Blind www.pianotuningschool.org Vancouver, WA -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101014/b610a8ad/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC