I always remove the key and stack when I do an action regulating. I clean the action frame, key, felts, etc. I check the integrity of the keys, felts, action parts and frame. I truly can't imagine anyone doing a complete action regulating without doing that.
Al -
High Point, NC
From: David Love
Sent: Sunday, October 17, 2010 10:34 AM
To: pianotech at ptg.org
Subject: Re: [pianotech] was curve now glide
Why would I remove the stack and keys to regulate the piano? Unless I’m leveling the keys from scratch I perform all regulating procedures with the action assembled and that includes even minor changes in the key leveling. There can be, as Ed Foote and Paul R-J pointed out, problems with bedding arising from poor stack fitting or irregularities in the key bed but I find that these problems (or that there is a problem) become evident and push you in the direction of taking an additional step to discover the nature of the problem which may very well be removing the keys. But most of the time, it’s unnecessary and doesn’t produce a more accurate bedding than the method I described, at least that’s what I find. I’m just offering this as another way to approach it whichever way people want to do it is fine with me.
David Love
www.davidlovepianos.com
From: Al Guecia/AlliedPianoCraft [mailto:AlliedPianoCraft at hotmail.com]
Sent: Sunday, October 17, 2010 5:19 AM
To: davidlovepianos at comcast.net; pianotech at ptg.org
Subject: Re: [pianotech] was curve now glide
Yes, true, but when you are regulating a piano, don't you remove the stack and keys? That's my point, if you have the stack and key off, I think it's an easier, better way to do it. But if you are not regulating the piano, there is nothing wrong with fitting the frame with the keys on. I do it all the time.
Al -
High Point, NC
From: David Love
Sent: Saturday, October 16, 2010 9:43 AM
To: pianotech at ptg.org
Subject: Re: [pianotech] was curve now glide
Geez. I think we're having a hard time with the word "contrarian". So let me restate. Contrary to those who advocate for bedding the keyframe with the stack and keys removed I prefer to do it with the action assembled. Of course I don't think there's anything wrong with either method. I do think that going to the trouble of removing stack and keys is unnecessary.
David Love
www.davidlovepianos.com
----------------------------------------------------------------------------
From: "Al Guecia/AlliedPianoCraft" <AlliedPianoCraft at hotmail.com>
Sender: pianotech-bounces at ptg.org
Date: Sat, 16 Oct 2010 07:31:26 -0400
To: <pianotech at ptg.org>
ReplyTo: pianotech at ptg.org
Subject: Re: [pianotech] was curve now glide
David, it's neither contrarian nor wrong to bed the frame with the keys on, in fact, that's the way I do it in the field or when prepping a piano for sale. The only time I bed the frame with the stack and no keys is when I have a piano in my shop and I'm doing a regulating.
Al -
High Point, NC
From: David Love
Sent: Saturday, October 16, 2010 1:08 AM
To: pianotech at ptg.org
Subject: Re: [pianotech] was curve now glide
It’s contrarian in that the others were advocating bedding the keyframe with keys and stack removed. I see no particular advantage in doing it that way and in the field it’s not practical. I suppose you should check the una corda bedding but if it’s different what do you do? I would opt for the bedding with the key set in the rest position.
David Love
www.davidlovepianos.com
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of PAULREVENKOJONES at aol.com
Sent: Friday, October 15, 2010 9:51 PM
To: pianotech at ptg.org
Subject: Re: [pianotech] was curve now glide
David:
This isn't contrarian. It's just the same procedure with the entire assembly together.
The advantage of achieving positive contact with the keys off, then loading them on after, is to insure that the flex of the keybed with pedal use doesn't "unbed" the center even by the slightest.
No-one has addressed shift-bedding (una corda). There can be very slight variations across the surface of the bed where the glide contacts it, and it is wise to check the una corda position bedding as well. Minor detail.
P
In a message dated 10/15/2010 7:58:51 P.M. Central Daylight Time, pianoboutique at comcast.net writes:
Not to be a contrarian but I bed keyframes with everything together. The technique I use was presented by Steinway’s John Patton at one of the conventions. Can be done in a couple of minutes or less on a Steinway. Pianos that have glides that are buried underneath the keys require at least the removal of the covering keys naturally. The process is simple and requires you to just back off the glides enough to be sure that none are touching the keybed which you can test be pressing down on the glide bolt with a wrench (or a screw driver if it’s a screw type) using the back of your hand against the pinblock as leverage. You will be able to see the keys flex downward when there is a space there. When they all produce a bit of flex then start in the center and turn each bolt down until there is no flex, backing it off just slightly in order to produce that telltale knock and then just setting the bolt down to eliminate the knock/flex. Go alternately outward until all are bedded. Then go back to the center and make sure you haven’t “unbedded” the center glides by turning the outer bolts down too far. If you have then start over. It requires a bit of touch and sensitivity but it can be done quickly and accurately with some practice.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101017/4a00a258/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC