I would agree with that. David Love www.davidlovepianos.com -----Original Message----- From: David Boyce <David at piano.plus.com> Sender: pianotech-bounces at ptg.org Date: Mon, 18 Oct 2010 23:20:04 To: <pianotech at ptg.org> Reply-To: pianotech at ptg.org Subject: Re: [pianotech] Regulating, was curve was glide Letoff should surely be the same after hammer filing as before. Hammer filing generally should not remove all trace of grooves. The bottom of the grooves (the part of the hammer, essentially, that sets the string in motion) will therefore still be the same distance from the strings at letoff following filing. That's not to say that the distance is correct, or the same as when the hammers were new. But filing of itself shouldn't change it. No? Best regards, David Boyce. > Can you really? What just happened to the letoff after you filed the > hammers? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101018/e99dd2bc/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC