[pianotech] How come?

[David Love]

What do you mean by setting the pins "heavily or lightly"


David Love
www.davidlovepianos.com

-----Original Message-----
From: Thomas Cole <tcole at cruzio.com>
Sender: pianotech-bounces at ptg.org
Date: Sat, 23 Oct 2010 14:55:34 
To: <pianotech at ptg.org>
Reply-To: tcole at cruzio.com, pianotech at ptg.org
Subject: Re: [pianotech] How come?

Have you considered that it may be a function of pin setting technique? 
In my own experience if I set the pins too heavily in the high treble, 
those notes will be sharp at the next tuning. Most people don't pound 
the high treble so I try to set the pins more lightly.

Tom Cole

On 10/23/10 1:35 PM, tnrwim at aol.com wrote:
> I have quite a few customers that I tune once a year, like clockwork. 
> The pianos are very stable, often off by less than one or two cents, 
> all up and down the keyboard, xxcept for the top four or five notes. 
> Invariably, these notes are low as much as 6 cents. When I first came 
> here, I noticed that most pianos were a little flat in the top octave, 
> and assumed the previous tuner just didn't get it right. But now I'm 
> having the same syndrome.
> Recognizing that the middle of the soundboard fluctuates the most, and 
> presumably the edges of the soundboard don't fluctuate at all, how 
> come the last 5 or 6 notes in the high treble are going flat?
> Wim
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101023/68bbc213/attachment.htm>