[pianotech] New Ronsen Price list and genral info

[Lou Novak]

List-
Dale just did a set for me and I'll never use anyone else- (I've tried them all).
#16 Ronsen Wieckert felt, custom weight (within 1 tenth of a gram) bored to samples.
Tokiwa shanks and flanges - installed on 1986 Yamaha G3 - 
These hammers required very little voicing - shanks required minor traveling and burn in -
flanges we pinned with in tolerances -
I could not be happier and this Yamaha sounds like no other - great sustain, beautiful tone.
Thanks Dale-
Keep up the good work.
-Lou
Puget Sound Chapter


Great job Dale - 
  ----- Original Message ----- 
  From: Dale Erwin<mailto:erwinspiano at aol.com> 
  To: pianotech at ptg.org<mailto:pianotech at ptg.org> 
  Sent: Wednesday, September 01, 2010 12:11 PM
  Subject: [pianotech] New Ronsen Price list and genral info


      Hi All
   First from Ray and I... thanks for all the support over the last year or so.

   A couple of notes:  
     The Ronsen wholesale Price list is no longer displayed on line.  
     A for technicians only Price list can be had by e-mailing me Erwinspiano at aol.com<mailto:Erwinspiano at aol.com>
    
   Also there are new parts and services available.
    We now offer pre-hanging and custom strike weight prep services on all Ronsen hammers. see Dale
    Abel shanks for Steinway And Mason and Hamlin, Yamaha and others.
    All Tokiwa parts available for your jobs as well.

   For Wholesale Price list, List of services,felt choices and parts.  E-mail me privately and I'll send one out. 



  Dale S. Erwin
  www.Erwinspiano.com
  Custom piano restoration
  Ronsen piano hammers...
   R & D and technical support
  Sitka soundboard panels
  209-577-8397
  209-985-0990
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100902/49acd33d/attachment.htm>