[pianotech] Melting on plastic elbows

[David Nereson]

I have a homemade elbow holder that chucks in the drill -- it 
just spins the elbow rather than the wire, which may not be 
"chuckable" if it's got a button on the top end.
    --David Nereson, RPT

----- Original Message ----- 
From: "Dale Erwin" <erwinspiano at aol.com>
To: <pianotech at ptg.org>
Sent: Friday, September 24, 2010 8:40 AM
Subject: Re: [pianotech] Melting on plastic elbows


We used to chuck the wire in a drill and spin them in