[pianotech] Melting on plastic elbows

[Joe Goss]

William, That tip just made my next one easier to do thanks.
Joe Goss BSMusEd MMusEd RPT
imatunr at srvinet.com
www.mothergoosetools.com
  ----- Original Message ----- 
  From: Piano Boutique 
  To: pianotech at ptg.org 
  Sent: Monday, September 27, 2010 2:03 PM
  Subject: Re: [pianotech] Melting on plastic elbows


  Robert,

  I do it all the time.  Just bend a center pin to go in a small handle, brake out the old stuff, insert the crooked small center pin and insert another pin of the right size from the other side.   You can hold it with a small vice grip.   I put the action on a cradle and tip it forward and lift up the wippen that I want to work with.  Takes about 45 minutes to install a set of wood replacements.

  William



    ----- Original Message ----- 
    From: Robert Casper 
    To: pianotech at ptg.org 
    Sent: Monday, September 27, 2010 3:06 PM
    Subject: Re: [pianotech] Melting on plastic elbows


      Anybody ever replace the elbows without pulling the action?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100927/202cb418/attachment.htm>