[pianotech] Damper Felt

[Ed Foote]

Inre uneven trichord felt, Dale writes: 

>> I think trichord felt from anywhere must come that way. Tokiwa ...the same deal. I cut the slot deeper and add 1 to 2 pieces of kite string to get them to work.  If that fails, I use the trusty damper smushing plier on the fat leg.   


 



I have made them work by pulling the smaller side down with a long needle inserted lengthwise about 2/3rds of the way up the leg then trimming the bottom to make both legs even. But I shouldn't have to.  
Ed 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110421/87a6d834/attachment.htm>