[pianotech] Bridge pin locations help (image oops)

[David Love]

So when you use the center string as a reference you have more of problem?

David Love
www.davidlovepianos.com


-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Mr. Mac's
Sent: Friday, February 04, 2011 7:33 AM
To: pianotech at ptg.org
Subject: Re: [pianotech] Bridge pin locations help (image oops)

Actually, David, that is the string I use for reference without seemingly a
problem.
But I'll check that again, just in case. Tks.

Keith

On Feb 4, 2011, at 8:50 AM, David Love wrote:

> . it appears
> that with the unison on the left (as viewed from the photograph) the bevel
> is suspiciously close (if not beyond) the bridge pin center.  It might be
> worth a look to see if the bevel contact point on that string might not
have
> migrated beyond the pin.  That might be the source of some falseness.