[pianotech] Bridge pin locations help (image oops)

Ron Nossaman rnossaman at cox.net
Sat Feb 5 13:06:37 MST 2011


On 2/5/2011 1:54 PM, Mr. Mac's wrote:

> Next tuning visit should show me something not
>     previously experienced in past tunings because of what I did today.
> I also put a drop of CA thin on all the bridge pins (speaking side only)
>     in that particular section. So many false signals.

A drop may well not be enough. It's also not a matter of overflowing the 
hole. It's a matter of ending up with the hole *full* of *hard* CA. You 
may need one or even two more applications to do that, with setup time 
between.



> Ten years I have been dealing with this, folks.
> Probably a hundred tunings + during that time on this one piano alone  :-(

Shoulda asked, man... <G>

Ron N


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC