I haven't used this tool, but I think it's what you're looking for. And if you do some searching on the net, you can probably find a number of others like it. http://www.reidsupply.com/Detail.aspx?itm=AMF-259 Good luck, Brian > Date: Sun, 6 Feb 2011 09:03:11 -0500 > From: jimialeggio at gmail.com > > I've made and busted 3 spanner wrenches to remove these nose bolt nuts > on small Chickerings. > > Any ideas on a tool that deal with these effectively? > > The problem I have is that the 2 holes are only 1/8" diameter. This > really doesn't give me much scope to give the spanner pins (I guess > you'd call them) any significant bending resistance. I tried using 1/8" > drill bit shafts for the pins, but they sheared. > > Jim I -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110206/7fa12f40/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC