[pianotech] Bottom Board Material

[Terry Farrell]

Yup. Bottom board, not knee board. Ambiguity?

Terry Farrell

On Feb 17, 2011, at 9:13 PM, Phil Frankenberg wrote:

> Absolutely the maple. I think Wim is thinking knee board. The fact  
> that you were concerned about screws holding clarified the ambiguity  
> for me.
>
> Phil Frankenberg
> CSUChico
> Chico Ca.
>
> ----- Original Message ----- From: "Wim Blees" <tnrwim at aol.com>
> To: "Pianotech" <pianotech at ptg.org>
> Sent: Thursday, February 17, 2011 5:44 PM
> Subject: Re: [pianotech] Bottom Board Material
>
>
> Terry
>
> If you have the maple, and the equipment to do edge glueing, I would  
> suggest that. You will, however, have to cover the finished panel  
> with veneer, the same wood as the rest of the piano.
>
> Wim