[pianotech] practice rail

[John Formsma]

Marshall,

I saw one of these just today. It had holes for a screw on either side of
the case, and also was attached to a dowel by a screw. The one I saw had a
front rail punching between each side of the aluminum rail and the case.

--
JF

On Tue, Feb 22, 2011 at 2:10 PM, Marshall Gisondi
<pianotune05 at hotmail.com>wrote:

>  Hi Everyone,
> I tuned up this Winter spinet after I did some work on it, but it's been a
> while since I took the practice rail off.  I find it odd that this piano had
> one.  I'm curious, are there supposed to be two dowles or only one on the
> far right where the metal arm screws into.  It was an interesting
> arrangement.  I couldn't recall where the left side of this rail screwed
> into. Is there suposed to be two dowles?  The customer was out of the
> country for a month and finally got back with me, so I put the action in
> last week and tuned it today but I cannot recall how this practice rail
> muffler rail goes backin. My wife who has 20/20 sight couldn't see any screw
> holes on the left inside part of the piano either.  I should have taken a
> pic. of it.  Thanks everyone
> Marshall
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110222/ce97db41/attachment.htm>