The easiest way for me to make a hitch loop is to use round-nose pliers, make a 3/4 loop with a long tail, then hole the loop with your pliers while you push the tail around the wire to make the coils. No special tools are required. -John Parham > -------- Original Message -------- > Subject: Re: [pianotech] Making a hitch pin loop > From: Jon Page <jonpage at pianocapecod.com> > Date: Sun, December 26, 2010 4:37 pm > To: pianotech at ptg.org > > > >Then just bend the wire around the nail, then take the free end, and > >wrap it around the wire. > > > It's a little more involved than that. The two wires need to be > twisted together or bent around each other. > There is a smaller version which has one wire wrapped around the > other but it is for a shorter segment. > > -- > > Regards, > > Jon Page
This PTG archive page provided courtesy of Moy Piano Service, LLC