Two things - get one of these and wear a kidney belt (or preschedule a chiropractor visit.). Conrad Hoffsommer From: hoppsmusic at hotmail.com To: pianotech at ptg.org Date: Wed, 5 Jan 2011 01:04:25 +0000 Subject: [pianotech] Tuning a Square Hello all, I have been asked to tune a square grand that has been refurbished..new strings, new hammers, case refinish and keytops. Dampers and soundboard are original. I plan to leave the piano close to the pitch it resides at now. I don't know if the pinblock has been changed. Any advice on how to approach this job and pitfalls to look out for I would appreciate the advice. I'm a little reticent. Thanks, Steven HoppMidland, TX -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110104/5ff9c714/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: MVC-020F.JPG Type: image/jpeg Size: 88051 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110104/5ff9c714/attachment-0001.jpeg>
This PTG archive page provided courtesy of Moy Piano Service, LLC