Very poor scaling. Some Sohmer scales are among some of the worst I’ve ever evaluated—and I’ve been through hundreds, if not thousands of them.
ddf
Delwin D Fandrich
Piano Design & Fabrication
620 South Tower Avenue
Centralia, Washington 98531 USA
del at fandrichpiano.com
ddfandrich at gmail.com
Phone 360.736.7563
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Carlos Ralon
Sent: Thursday, January 06, 2011 6:32 AM
To: pianotech at ptg.org
Subject: Re: [pianotech] Sohmer scale
Wm,
To my knowledge..., Sohmer did not use any half sizes in their scales. I just un-strung an old 5'7" Sohmer and it hod no half sizes. Anyone know why?
Carlos Ralon, RPT
----- Original Message -----
From: tnrwim at aol.com
To: pianotech at ptg.org
Sent: Wednesday, January 05, 2011 11:51 PM
Subject: Re: [pianotech] Sohmer scale
Why would anyone want to use the original scaling on any piano?
On some pianos, it might make a difference. But not on all pianos. Sohmer, for one, did a pretty good job. But besides that, this is a situation where I, (and the customer), don't want to spend the time and/or money to figure out a new scale. It's just not worth the effort to try to improve on the piano.
Wim
-----Original Message-----
From: Terry Farrell <mfarrel2 at tampabay.rr.com>
To: pianotech <pianotech at ptg.org>
Sent: Wed, Jan 5, 2011 2:41 pm
Subject: Re: [pianotech] Sohmer scale
I always start scratching my head when I see treads like this. Why would anyone want to use the original scaling on any piano? I mean I think this thread is separate from the museum restoration thread......
Terry Farrell
On Jan 5, 2011, at 1:08 PM, tnrwim at aol.com wrote:
Rick
I got rid of my scaling books when I moved to Hawaii, thinking I would never restring a piano again. Could I ask you to send me the numbers, please, privately if you wish.
Thanks
Wim
-----Original Message-----
From: RWyatt8547 <RWyatt8547 at aol.com>
To: pianotech <pianotech at ptg.org>
Sent: Wed, Jan 5, 2011 6:42 am
Subject: Re: [pianotech] Sohmer scale
Wim
look on page 397 in Travis guide to restringing , I believe that is the scale you need
Rick Wyatt
Dallas chapter
In a message dated 1/4/2011 4:42:06 P.M. Central Standard Time, tnrwim at aol.com writes:
Does anyone have the scale for Sohmer grand model 57. Customer removed all the stripngs, and wrote down the scale that was on the plate, but didn't write down how many notes per size. I've more or less figured out what I need, but I've run out of hitch pins in the middle section.
Wim
Sent from my HTC PURE™, a Windows® phone from AT&T=
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110106/d7f27c9b/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC