Thanks. When was that velcro posting thread, recently? ------Original Message------ From: Carlos Ralon Sender: pianotech-bounces at ptg.org To: pianotech at ptg.org ReplyTo: pianotech at ptg.org Subject: Re: [pianotech] Steinway S and fallboard springs Sent: Jan 11, 2011 6:17 AM David The model S in my shop has a feble little spring on the base side that a fly could slam shut. It rubs against the side of the fall only when open. I use the (here we go again) Velcro strip method as previously posted when requested. The new crop comes in at Spring time. Carlos ----- Original Message ----- From: "David Love" <davidlovepianos at comcast.net> To: <pianotech at ptg.org> Sent: Tuesday, January 11, 2011 12:58 AM Subject: [pianotech] Steinway S and fallboard springs > Does anyone have a Steinway Model S handy that can tell me if the > fallboard > on that model typically uses those pressure springs to prevent it from > falling over too easily? > > David Love > www.davidlovepianos.com > > > > > David Love www.davidlovepianos.com
This PTG archive page provided courtesy of Moy Piano Service, LLC