Les, Thanks for the tip and the complement. As for the website, it's 3 years old and seriously needs updating. But, it's functioning and like most things, it will get revamped when I get a round tuit. :-) Thanks again. Barb Nobbe -----Original message----- From: Les Koltvedt <t4348lk at yahoo.com> To: pianotech at ptg.org Sent: Wed, Jan 19, 2011 12:40:59 GMT+00:00 Subject: [pianotech] Replacing action bracket bolt Barb, Make sure the action bolt is at the correct height BEFORE tweaking it to mate to the action bracket, otherwise if you rotate after the fact, you will be either raising or lowering the action bracket. If you have a long sstraight edge, you could lay it across the remaining ones to help determine the height. btw, I like your web site, especially the state map with highlighted counties you service...nice touch. Les Date: Tue, 18 Jan 2011 22:30:51 -0500 From: "Barbara Nobbe"<barbara at pitchperfectpianos.com> To: pianotech at ptg.org Subject: Re: [pianotech] Fw: Replacing action bracket bolt Message-ID: <07449aa7-02fd-41e3-be4b-6871b7df8aa2> Content-Type: text/plain; charset="utf-8" Tom C, Tom D and William, Thank you for the help and I liked Isaac's tip about the VJ lube and pipe nipple.? I think I will try to rethread the original bolt first though, just for practice sake.? Thanks for the idea.? If it works, great, the repair is fixed!? If I mess it up worse, then plan B, I can still replace the bolt.? It feels good to have a back up...and an excuse to go shopping! Lol. Thanks again! Barb Nobbe, RPT Lexington, KY -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110119/754fa6c2/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC