Both good ideas Ron and Keith! I was aslo going to turn them out and swedge the hole then re-insert. Thoughts? ----- Original Message ----- From: "Mr. Mac's" <tune-repair at allegiance.tv> To: <pianotech at ptg.org> Sent: Wednesday, January 19, 2011 12:56 PM Subject: Re: [pianotech] Knabe knapstans Chuck, You might stop trying to adjust them until an excellent idea comes forth from within you or from the list. Keith On Jan 19, 2011, at 12:47 PM, Chuck Vetter wrote: > Hi all, > Just hung new hammers on a 1903 Knabe and as I started to adjust the very > tight capstans, they are breaking at or below the surface. Any > suggestions? Drilled and filled the first one, but am breaking more as I > go along. > Chuck Vetter
This PTG archive page provided courtesy of Moy Piano Service, LLC