Would Liquid Wrench or the like be inappropriate for a high friction metal to wood contact such as this? Alan Eder -----Original Message----- From: Ron Nossaman <rnossaman at cox.net> To: pianotech <pianotech at ptg.org> Sent: Wed, Jan 19, 2011 6:00 am Subject: Re: [pianotech] Knabe knapstans On 1/19/2011 12:47 PM, Chuck Vetter wrote: > Hi all, > Just hung new hammers on a 1903 Knabe and as I started to adjust the > very tight capstans, they are breaking at or below the surface. Any > suggestions? Drilled and filled the first one, but am breaking more as I > go along. > Chuck Vetter Heat 'em, then lubricate once you have them moving. Ron N -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110119/062a453e/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC