If they are working themselves loose, try putting a lock washer in. That will help. I prefer the wing nuts myself. Jer From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Floyd Gadd Sent: Monday, January 24, 2011 9:17 AM To: pianotech at ptg.org Subject: Re: [pianotech] Wing nuts to square Nuts I'm not sure why I would want to routinely swap out wing nuts for square nuts. Both can be snugged up as tightly as necessary, especially if I reach for the vise grips. And if something works loose, the customer can make a provisional fix instantly, rather than running for a tool. What am I missing? Floyd Gadd Manitoba Chapter Quote: Hi, If I were to swap out wing nuts inside of a bench that connect the bench legs with square nuts, what size do I need? Are American and Asian bench bolts different sizes? I want to purchase some and carry them with me to swap them out when I encounter wing nuts. Thanks, BPD -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110124/e12b4242/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC