[pianotech] Hardware part..don't know the name

[Gary]

Thanks Roger, I called Yamaha this afternoon and got the part ordered.
gary


On 7/12/2011 5:36 PM, Roger at Integra.net wrote:
> Gary,
> It's called a "T" nut. Yamaha should have them. I believe they changed 
> the dimension somewhere in the "80's., so you should get the serial 
> number of the piano.
> Roger
>
> ----- Original Message ----- From: "Gary" <gmcc at charter.net>
> To: <pianotech at ptg.org>
> Sent: Tuesday, July 12, 2011 12:02 PM
> Subject: [pianotech] Hardware part..don't know the name
>
>
>> Yamaha C3, when screwing the leg bolt on, it goes up into a round 
>> piece of metal with a threaded hole situated in the keybed.
>> I need one, but don't know the name.  Hope my description makes 
>> sense; I should get with the 21st century and get a phone with a camera.
>> thanks all,
>> gary
>>
>
>