The designer must have felt that extra stiffening of the plate was needed, but didn't want to create a scale break in order to make a full bar at that location. Don Mannino -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Richard Ucci Sent: Friday, July 15, 2011 7:03 AM To: pianotech at ptg.org Subject: [pianotech] Plate design What is the purpose of this plate design other than to make it harder to mute strings?
This PTG archive page provided courtesy of Moy Piano Service, LLC